Home » Welding Supplies » Welding Electrode Holder Twist Type 600 Amp

Welding Electrode Holder Twist Type 600 Amp

£8.95 ex VAT

Further Reductions Available On Request 01276 505012

  • Yellow Electrode holder
  • 600A
  • Twist type



A good quality twist type 600A MMA electrode holder at an affordable price to be fitted onto a welding lead set for stick / MMA welding. Yellow coloured victory style everyday electrode holder for Arc Welding, suitable for one electrode position.  Simply unscrew the handle body and the jaws will open up.  Screw the handle clockwise and the electrode will be clamped in place.


The benefit of a twist type electrode holder over a crocodile or optimum type electrode holder is the sturdiness of the grip on the electrode.

  • Electrode holder rated to 600 amps
  • Other cable accessories, lengths, and sizes available – see related items below


Easy To Fit:  Cut back a section of insulation from the suitably rated welding cable to expose the copper strands.    Completely unscrew the handle to remove the head of the holder.  Insert exposed copper wire into the brass retaining block and tighten grub screws to secure cable.  Place block back into the underside of the handle and slot into the shaped plastic section inside.  Screw head of the electrode holder back onto the handle / brass block.  Generally, the other end of the earth clamp will have a dinse cable plug attached to match the size of the connection to the machine.


The electrode holder and welding leads should be suitably rated to the machine being used.  If too much current passes through the lead and holder, it will get hot, can get damaged and could be a fire risk.