Home » Welding Supplies » TIG Welding Supplies » TIG Filler Rods » Stainless Steel TIG Filler Rods » Weld Star ER 410 Stainless Steel TIG Filler Rods 2.4mm – 5kg Pack

Weld Star ER 410 Stainless Steel TIG Filler Rods 2.4mm – 5kg Pack

£55.00 ex VAT

Further Reductions Available On Request 01276 505012

  • 410
  • 5kg Pack – 2.4mm
  • Stainless Steel
SKU: 6011100196 Categories: ,

Description

WELD STAR ER 410 STAINLESS STEEL 2.4MM TIG FILLER RODS – 5KG

AWS A5.9 – ER 410

A 5kg pack of 2.4mm Weld Star ER 410 stainless steel TIG welding rods.  Designed for welding matching base materials.  Additionally used to deposit overlays on carbon steels, resulting in enhanced resistance to the effects of corrosion, erosion and abrasion.  Typical uses include the production of turbine parts, heat furnaces and refinery applications. 410 filler metals also play a role in industries such as petro-chemical plant and steel mills.

For the purposes of ensuring satisfactory levels of ductility in finished welds using 410 stainless steel filler wire it is important to carry out both preheat and post weld heat treatments.  Pre and post heat can significantly reduce the possibility of cracking issues.

Weld Star ER 410 stainless steel welding rods are ideal for welding or repairing 400 series stainless steels such as 410, 416, 420 and 431. The increased Chromium (Cr) content provides excellent resistance to the effects of corrosion particularly in high temperature environments.

Features & Benefits
  • Excellent resistance to Corrosion
  • Designed for use with matching base materials
  • Available in 1.6mm, 2.4mm and 3.2mm
  • Good strength levels.
  • Outstanding ductility
PreHeat & Postweld Heat Treatments
  • PreHeat Treatment – This process involves heating the area around the weld joint prior to the actual weld being performed.  If a specific preheat temperature is required, this can be confirmed by using a Tempilstick™.  The key benefit of a preheat treatment is the reduction in the cooling rate of the weld. This results in moisture being driven out of the weld.  By preventing hydrogen build-up it is possible to avoid such issues as cracking.
  • Post Weld Heat Treatment – A controlled system involving the application of heat after a weld has been carried out. The applied heat is kept below the critical transformation temperature in order to maintain the structure of the completed weld.  The heat level is maintained for a predetermined length of time.  The key benefit’s of post weld heat treatment (PWHT) include alleviating residual stress, increase of strength as well as the reduction of cracking at the microstructural level.
Industries & Application
  • Production of Turbine parts
  • Petrochemical Equipment
  • Heat furnace and refinery applications
  • Steels Mills
  • Pump and Valve Parts Production

 

Chemical Composition % (Typical)
C% Mn% Si% S% P%
0.015 0.55 0.48 0.004 0.028
Ni% Cr% Mo% Cu%
0.37 12.90 0.08 0.15

 

 

Mechanical Properties
Tensile Strength ≥450 MPa
Yield Strength ≥250 MPa
Elongation ≥15 %

Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.

 

Standards
EN ISO 14343-A – W 13
AWS A5.9 – ER 410

 

Typical Base Materials

Wrought or cast martensitic, types 403, 405, 410, and 416 stainless steel*

* Illustrative, not exhaustive list

Shielding Gases

EN ISO 14175 – TIG: I1 (Argon)

Welding Positions

EN ISO 6947 – PA, PB, PC, PD, PE, PF, P

In Conclusion

Weld Star 410 stainless steel TIG filler rods are suited for welding and joining of matching base materials.  They possess excellent mechanical properties including resistance to the effects of corrosion and impressive strength levels.   The ductility of finished welds can be maintained by carrying out both preheat and post weld heat treatments.  Heat treatments ensure and increase both strength and corrosion resistance.  Typical applications include the production of turbine and heat furnace parts.

 

Images are for illustration purposes only.

 

 

Reviews

There are no reviews yet.

Be the first to review “Weld Star ER 410 Stainless Steel TIG Filler Rods 2.4mm – 5kg Pack”