Home » Welding Supplies » TIG Welding Supplies » TIG Filler Rods » Weld Star – CrMo5 TIG Welding Wire 1.6mm 5kg (ER 80S-B6)

Weld Star – CrMo5 TIG Welding Wire 1.6mm 5kg (ER 80S-B6)

£56.00 ex VAT

Further Reductions Available On Request 01276 505012

  • High Temperature Resistant
  • CrMo5
  • 1.6mm 5kg
SKU: 3010300404 Categories: ,

Description

WELD STAR – CrMo5 TIG FILLER WIRE 1.6MM 5KG (ER 80S-B6)

AWS A5.28 – ER 80S-B6 / UKCA APPROVED

A 5KG pack of Weld Star 1.6mm CrMo5 heat resistant TIG welding rods constructed from a copper coated low alloy steel. Designed for welding steels with high levels of heat resistance with typical applications such as pressure piping in steam power generation plants, boiler and heat exchanger tubes, chemical and petrochemical equipment. It is also used in oil and thermo electrical industries.

Alloyed with Chromium (Cr – 5%) and Molybdenum (Mo – 0.5%) to ensure good heat resistance up to a working temperature of 650°C. These elements also increase levels of resistance to various types of corrosion including pitting, crevice corrosion and intergranular corrosion.  Chromium (Cr) also increases material hardness.

CrMo5 exhibits excellent mechanical properties including tensile strength (660MPa) and yield strength (560MPa).  As a result of the difference between these two figures the ductile nature of the wire is increased.  This is exhibited by its ability to endure twisting, misshaping and deforming without affecting the integrity of the finished weld. Moreover, this wire has excellent elongation capabilities, with a breaking point of 22% increase to its original length.

Due to its high strength and excellent corrosion resistance Weld Star CrMo5 TIG filler rods are a preferred choice for environments where hot hydrogen gas is present.  This is because of the ability to withstand the effects of high temperature hydrogen attack (HTHA).  This issue occurs at temperatures above 400°C and can result in serious failure.

Features & Benefits
  • Suitable for welding in all positions
  • High resistance to the effects of High Temperature Hydrogen Attack (HTHA)
  • Excellent quality weld deposits and attractive bead appearance.
  • Increased toughness due to the addition of Molybdenum(Mo).
  • Excellent heat resistance upto 650°C
  • Excellent levels of hardness
What is the ER 90S-B6 Classification?

This is broken down into the following components: ‘ER’ is the abbreviation electrode or in this case filler wire. This is followed by the number 80 which represents the minimum tensile strength, in this case 80,000 PSI (Pounds per Square Inch). The ‘S’ indicates the wire is solid.  This may sometimes be represented as ‘C’ which advises the welding wire form is a composite.  Finally, the ending letter/number combination (in this case B6) refers to the combination of Chromium (Cr – 5%) and Molybdenum (Mo – 0.5%) within the weld material.

Applications

Suitable for the following applications and industries:

  • Heat Exchangers
  • Piping in steam power generation plants
  • Boiler and Heat Exchanger Tubes
  • Chemical and Petrochemical Equipment
  • Oil Industry
  • Thermo Electrical Industry
  • Turbine Casting

The above applications are not an exhaustive list.

 

Chemical Composition % (Typical)
C% Si% Mn% P% S% Cu%
0.07 0.45 0.60 <0.012 <0.015 <0.25
Cr% Ni% Mo% Al% V% Ti%
5.70 <0.20 0.60 <0.020 <0.030 <0.010

 

Mechanical Properties (Typical)
Tensile Strength 660 MPa
Yield Strength 560 MPa
Elongation 22%
Impact Strength 180 J
Test Temperature +20ºC

Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.

 

Typical Base Materials

X12CrMo5, GX12CrMo5, A213, A217:C5, A355:P5, GS 12CrMo19 5*
* Illustrative, not exhaustive list

 

Standards
EN ISO 21952-A – W CrMo5Si
AWS A5.28 – ER 80S-B6

 

Shielding Gases

EN ISO 14175 – TIG: I1 (Argon)

 

Welding Positions

EN ISO 6947 – PA, PB, PC, PD, PE, PF

 

 

In Conclusion

As shown above Weld Star CrMo5 (ER 80S-B6) TIG heat resistant filler rods are ideal for use in extreme environments and at working temperatures upto 650°C.  The filler metal can withstand the effects of various forms of corrosion and is used extensively in harsh environments.  CrMo5 has excellent elongation capabilities of upto 22% of it original size.

Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality.

Wire images are for illustration only.

Reviews

There are no reviews yet.

Be the first to review “Weld Star – CrMo5 TIG Welding Wire 1.6mm 5kg (ER 80S-B6)”