Home » Welding Supplies » TIG Welding Supplies » TIG Filler Rods » Weld Star A33 TIG Welding Wire (ER 90S-B3) 1.6mm 5kg

Weld Star A33 TIG Welding Wire (ER 90S-B3) 1.6mm 5kg

£43.50 ex VAT

Further Reductions Available On Request 01276 505012

  • A33 TIG Rods
  • UKCA Approved
  • 1.6mm 5kg
SKU: 3010300367 Categories: ,

Description

WELD STAR A33 TIG FILLER RODS 1.6MM 5KG

(ER 90S-B3)

AWS A5.28 – ER 90S-B3 / UKCA APPROVED

A 5KG pack of Weld Star 1.6mm A33 TIG Welding Rods constructed from a copper coated low alloy steel. Designed for welding high pressure piping systems within harsh / demanding environments.  Additionally, also used for boiler work.

Typical applications include pressure piping in steam power generation plants, boiler and heat exchanger tubes, chemical and petrochemical equipment. A33 filler wire is also used in oil and thermo electrical industries.

Alloyed with Chromium (Cr – 2.25%) and Molybdenum (Mo – 1%) to ensure good heat resistance up to a working temperature of 600°C. These alloys also increase levels of resistance to various types of corrosion including pitting, crevice corrosion and intergranular corrosion.  Chromium (Cr) also increases material hardness

A33 TIG rods provide excellent mechanical properties including tensile strength of 640MPa and yield strength of 540MPa.  As a result of the difference between these two figures the ductile nature of the wire is increased.  This is exhibited by its ability to endure twisting, misshaping and deforming without affecting the integrity of the finished weld. Moreover, this wire has excellent elongation capabilities, with a breaking point of 22% increase to its original length.

Careful control of preheat, interpass temperatures and postweld heat treatment are all essential considerations to prevent issues such as hot cracking.

Features & Benefits
  • Suitable for welding in all positions
  • Excellent quality weld deposits and attractive bead appearance.
  • Increased toughness due to the addition of Molybdenum(Mo).
  • Excellent heat resistance upto 600°C
  • Excellent levels of hardness
What is the ER 90S-B3 Classification?

This is broken down into the following components: ‘ER’ is the abbreviation electrode or in this case filler wire. This is followed by the number 90 which represents the minimum tensile strength, in this case 90,000 PSI (Pounds per Square Inch). The ‘S’ indicates the wire is solid.  This may sometimes be represented as ‘C’ which advises the welding wire form is a composite.  Finally, the ending letter/number combination (in this case B3) refers to the combination of Chromium (Cr – 2.25%) and Molybdenum (Mo – 1%) within the weld material.

Applications

Suitable for the following applications and industries:

  • Heat Exchangers
  • Piping in steam power generation plants
  • Boiler and Heat Exchanger Tubes
  • Chemical and Petrochemical Equipment
  • Oil Industry
  • Thermo Electrical Industry
  • Turbine Casting

The above applications are not an exhaustive list.

Chemical Composition % (Typical)
C% Si% Mn% P% S% Cu%
0.08 0.50 0.60 <0.012 <0.015 <0.25
Cr% Ni% Mo% Al% V% Fx ppm
2.40 <0.20 1.00 <0.020 <0.010 <15

 

Mechanical Properties (Typical)
Tensile Strength 640 MPa
Yield Strength 540 MPa
Elongation 22%
Impact Strength 90 J
Test Temperature -10ºC

Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.

Standards
EN ISO 21952-B – 2C1M
AWS A5.28 – ER 90S-B3

 

Typical Base Materials

10CrMo9-10, GS 17CrMoV5 11, 10CrSiMoV7, 12CrSiMo8, GS12CrMo9 10, 10CrSiMoV7, 10Cr V63, 12CrSiMo8*
* Illustrative, not exhaustive list

Shielding Gases

EN ISO 14175 – TIG: I1 (Argon)

 

Welding Positions

EN ISO 6947 – PA, PB, PC, PD, PE, PF

In Conclusion

Weld Star A33 heat resistant TIG filler rods have excellent mechanical properties including strength, ductility and resistance to a wide range of corrosion issues.  Combined with an impressive working temperature of up to 600°C.  As a result of these properties, it’s used for various applications such as pressure piping in steam power generation plants, boilers and heat exchanger tubes.

Green wire is produced using virgin raw materials sourced from specialised steel mills, which ensures consistent reliability and quality.

Wire images are for illustration only.

Reviews

There are no reviews yet.

Be the first to review “Weld Star A33 TIG Welding Wire (ER 90S-B3) 1.6mm 5kg”