Home » Welding Supplies » TIG Welding Supplies » TIG Welding Torch Spares » TIG Torch Zipper Cover – 10ft 3″ Wide

TIG Torch Zipper Cover – 10ft 3″ Wide

£12.95 ex VAT

Further Reductions Available On Request 01276 505012

  • TIG Torch Zipper Cover
  • 3″ Wide
  • 10 Foot Long

Description

TIG Torch Zip Sheath Cover – 10ft Long 3″ Wide

A 10 foot nylon TIG torch zipper cover for protection of TIG torch leads, sometimes referred to as bagging.  These zipper covers come as a flat piece of material with a zip fastening.  Simply lay the cables of your TIG torch over the material and use the zip to encase the cables.  A zip tie can then be used to hold the cover onto the torch and another on the opposing end to secure the zip toggle.

The 3″ version is ideal for WP9, WP17 and WP20 torches.

 

These zipper covers are perfect for repairing a TIG torch.  Often, a torch is supplied with a neoprene (rubber) sleeve which makes it very difficult to replace a power, gas or water hose in the event of damage.  In these instances, the rubber sleeve can be cut off and once repaired, a zipper cover is used in its place.

The 10 foot version is ideal for a 12ft TIG torch particularly when the last part of sheathing near the torch is leather.  The zipper cover can be fastened to the end of the leather sheath without being too long and baggy.

 

When replacing the sheathing of a weldcraft style torch (with a black handle), the rubber button retaining part can be pulled up to slip the zipper cover under.  The cover can be secured with some tape and the rubber boot can be placed back over the top.

 

We also have 12ft, 22ft and 25ft lengths in 3 or 4″ widths as well as leather covers for ultimate protection.

Reviews

There are no reviews yet.

Be the first to review “TIG Torch Zipper Cover – 10ft 3″ Wide”