Home » Welding Supplies » TIG Welding Supplies » Small Dinse Cable Socket 10 – 25mm

Small Dinse Cable Socket 10 – 25mm

£3.20 ex VAT

Further Reductions Available On Request 01276 505012

  • Dinse Socket
  • 10/25 Dinse
  • Easy to fit



A small dinse cable socket suitable for welding cable from 10 to 25 mm cross section. A female dinse plug can be used on the end of a welding cable to make a welding cable extension or to connect up to a piece of equipment such as a wire feed unit.

A dinse plug is an industry standard connection to most modern welding machines.  They are used to connect earth leads on MIG, TIG and MMA welding machines as well as electrode holder leads for stick / MMA welding.  Designed to be fitted to the end of a welding cable of suitable size, they can also be used to make welding cable extensions when used with a female dinse cable plug.


A 10 – 25mm dinse socket can accept both 10mm and 25mm² welding cable.  The dinse connector is a brass female connector with a small keyway which fits by way of a half turn a male dinse plug.


  • Brass push and twist type female connector
  • Grub screw in body for securely attaching the welding cable.
  • Moulded rubber insulation boot
  • CE approval

To fit a dinse cable socket, simply strip back a section of insulation from the end of a suitably rated welding cable.  Place the rubber boot of over the cable and insert copper strands from the cable into the brass connector.  Tighten grub screws in the connector and ensure a firm grip has been achieved.  Slide rubber boot over the grub screw side of the connector, locking it into place.