WP20 FLEXI TIG TORCH HEAD REPLACEMENT | WP20
A WP20 Flexi TIG torch head to fit the WP20 water cooled TIG torch. Rated for 250A DC / 190A AC @ 100% Duty Cycle and fits 0.5mm to 3.2mm Electrodes. The WP20 takes the smaller Weldcraft style TIG torch spares, also compatible with the WP9 series. A flexi head allows the user to manipulate the head of the torch to suit a joint or angle and maintain a more comfortable welding position.
A WP20 torch head has 3 connections – water through power, a water connection and a shielding gas connection.
To change a water cooled head, ensure the torch is not connected to the machine. Next, remove the handle of the torch to expose the head and connections. Cut the wire fastenings or clamps holding the rubber hoses onto the tails of the head and remove the hoses from the tails. Use small spanners to undo the water through power nut. The head should now be disconnected. Reconnect the hoses to the relevant tails of the replacement head and secure with appropriate O clips or wire fastenings. Re-attach the water through power cable and tighten with spanners. Re-assemble the TIG torch handle and ensure the head is in the correct orientation.
Also see the WP20 rigid neck – More robust head and better for use if walking the cup.
This spare fits the following torches available from TBWS Welding Supplies:
- WP20 series industry standard water cooled torches from a number of manufacturers
Compliant with EN60974-7
Image for illustrative purposes only