Plasma Ring Diffusers for MT 45K-TPT 40 | GYS EasyCut-40 – 040175 (2 Pack)
GYS Plasma swirl ring for the EasyCut-40 / MT 45K-TPT 40 plasma cutting torch. When you order, you will receive 2 Swirl Ring Diffusers.
The swirl ring controls the swirling action of the gas around the electrode which centres the arc through the nozzle.
WHEN TO REPLACE: The swirl ring should be inspected for cracks, holes and deformities when changing other consumables. On average, a swirl ring can last up to 15 electrode and nozzle changes.
GYS plasma spares suitable for the handheld MT 45K-TPT 40 plasma torch, to fit the GYS EasyCut-40.
- 2 x Swirl Ring Diffusers (040175)
Individual spares are also available on the website – see related items below for each plasma spare.
When should I change my consumables?
|Nozzle (#040236)||Replace the nozzle when it looks damaged (traces of burns).|
|Tip (#040212)||Clean the inner part of the nozzle if clogged or dirty.
Replace the tip if the inner diameter is enlarged or distorted. When worn, the orifice size can increase which will widen the cutting kerf of the torch.
|Diffuser (#040175)||To be replaced if lateral openings are clogged.|
|Electrode (#040168)||Failure to replace an electrode can cause a blowout which will damage both the electrode and nozzle. If you need to slow down the cutting speed, are experiencing green discolouration of the arc or the arc is misfiring it is time to change the electrode.|