Home » GYS » GYS Plasma Cutters » Plasma Electrodes for GYS EasyCut-40 | MT 45K-TPT 40 Torch

Plasma Electrodes for GYS EasyCut-40 | MT 45K-TPT 40 Torch

£18.90 ex VAT

Further Reductions Available On Request 01276 505012

  • Plasma Cutter Consumables
  • Fits the GYS EasyCut 40
  • 10 Pack Electrodes
SKU: 040168 Category:

Description

Plasma Electrodes for MT 45K-TPT 40 | GYS EasyCut-40 – 040168 (10 Pack)

GYS Plasma electrodes for the EasyCut-40 /  MT 45K-TPT 40 plasma cutting torch. When you order, you will receive 10 electrodes.

 

These are one of the most commonly changed parts when using a plasma torch.  The electrode provides power to the plasma arc. An insert at the tip of the electrode is made from a material with a very high melting point, such as Hafnium. As the electrode wears, the insert will slowly erode away, forming a small hole in the electrode tip.

GYS plasma spares suitable for the handheld MT 45K-TPT 40 plasma torch, especially fitted for GYS EasyCut-40.

 

 

This includes:

  • 10 x Electrodes (040168)

 

Individual spares are also available on the website – see related items below for each plasma spare.


When should I change my consumables?
Part description
Conditions
Nozzle (#040236) Replace the nozzle when it looks damaged (traces of burns).
Tip (#040212) Clean the inner part of the nozzle if clogged or dirty.
Replace the tip if the inner diameter is enlarged or distorted. When worn, the orifice size can increase which will widen the cutting kerf of the cut.
Diffuser (#040175) To be replaced if lateral openings are clogged.
Electrode (#040168) To be replaced if a cavity appears on the center.  Failure to replace an electrode can cause a blowout which will damage both the electrode and nozzle. If you need to slow down the cutting speed, are experiencing green discolouration of the arc or the arc is misfiring it is time to change the electrode.