Home » Parweld » Parweld Arc Welders » Parweld XTS 403 MMA Welder

Parweld XTS 403 MMA Welder

Further Reductions Available On Request 01276 505012

  • Current Range: 20 – 400A
  • Three Phase 400V
  • Weight: 20.5 Kg
Clear selection
SKU: N/A Categories: , ,



The Parweld XTS 403 stick welder is a professional level 3 phase machine in a robust case to withstand everyday use.

Its small size and light weight make it perfect for mobile applications where the machine can be kept in a van etc and run from a generator.  Similarly, these units are equally suitable for workshop use.

Arc force and hot start technology makes striking and re striking electrodes easy.  Hot start increases current during arc initiation to get the weld started, whilst arc force kicks in if the arc distance becomes too short helping to stop the electrode sticking during the weld.

The Parweld XTS 403 is generator friendly too, capable of coping with power inputs with a fluctuation tolerance of ± 15%.


Lift start TIG welding can also be done with the XTS 403 using a basic TIG torch with manual gas valve – see related products. Using a suitable gas supply TIG welding of steel and stainless steel is possible (40A minimum).  Lift start TIG limits the arc current when the tungsten touches the work piece preventing electrode damage.  Simply touch the work piece to get the arc started and then lift slightly before welding.


  • 400V 3 phase
  • 400A @ 60% duty cycle
  • 35-50 panel socket connections
  • Supplied with 3m electrode holder lead and 3m earth lead with clamp.
  • Weld with 6mm electrodes
  • Lightweight – just 20.5 kg
  • Digital amperage display
  • Adjustable arc force
  • Over voltage and over current protection
  • Built in electrode anti sticking
  • 50V no load voltage
  • 88V open circuit voltage
  • 3 year return to base warranty
  • Manufactured to IP23S, ISO/IEC 60974-1, ISO/IEC 60974-6 and RoHS Compliant



SUPPLIED WITH:  Power source with 3m electrode holder lead, 3m earth return lead with clamp, 3m mains input lead, operating instructions

NOT SUPPLIED:  Equipment for lift TIG:  TIG torch, SS2G Argon Regulator (see related products below)


Input Supply 50/60Hz Fuse amps Amperage range Max electrode size Enclosure protection Duty Cycle Dimensions / Weight Generator requirements (+/-15%)
400V 20A 20 – 400A 6mm IP23S 400A @60% 530 x 250 x 400 mm / 20.5kg 17kVA



The Parweld XTS 403 comes with a 3 year warranty which is upheld by their large UK headquarters situated in the West Midlands.  In the unlikely event of a validated warranty claim, Parweld will collect the machine, repair and return the machine quickly without cost to the customer.

Additional information


Machine, torch and regulator package, Include Carry case (+£20)


There are no reviews yet.

Be the first to review “Parweld XTS 403 MMA Welder”