Description
Parweld XTP 63 Inverter Plasma Cutter
The Parweld XTP 63 Plasma is a powerful, lightweight, robust three-phase plasma inverter.
Variable output ideal for cutting metals up to 20mm thick. The infinite power control on-board allow for fine-tuning to be tailored to your needs, minimising dross and delivering a clean cutting edge. Minimise post cut clean up and maximise productivity!
On Air pilot ignition system, meaning the pilot arc automatically re-ignites when contact is severed then re-established with the workpiece. As a result, this ingenious system enables easy cutting of mesh or perforated materials. Non high frequency (HF) start also means electrically sensitive equipment need not be an issue.
Machine comes housed in a metal case equipped with a carry handle.
Material thicknesses:
- Recommended: 20mm
- Severance cut: 30mm
Compatible with Generators:
The XTP 63 is able to cope with the majority of generators, specifically with inputs which fluctuate by +/-15%.
Requires compressor that can generate 125Lpm @5 Bar, 4.5CFM @ 75 PSI
This machine comes with:
- XT4000 Torch 400V
- 3M Input Cable
- 3M Earth Lead
- Gas Hose
- Integrated pressure regulator
Technical Specifications:
| Input Power | AC 400V – 50/60 Hz |
| Dimensions (mm) | 430mm X 170mm X 310mm |
| Enclosure Protection | IP23S |
| Amperage Range | 10A – 60A |
| Starting Method | Short circuit |
| Fuse Rating | 10A |
| Duty cycle | 60% @ 40A |
| Cut Capacity | 20mm Clean / 30mm Severance |
| Generator KVA Input | 10 |
| Weight (Kg) | 13 |
ABOUT PARWELD
With a head office in the UK, Parweld have manufacturing facilities in China which are controlled to ensure quality and complete consistency of the products.
A 3 year warranty supplied as standard indicates the confidence in their products. In the unlikely event of an issue arising within the warranty period, a collection will be made of the machine and a repair/replacement* would be made all free of charge.
*Warranty decision is at the discretion of Parweld.
