Home » Oxford » Oxford Plasma Cutters » P13019 Drag Cutting Shield – P130 Plasma Torch

P13019 Drag Cutting Shield – P130 Plasma Torch

£10.90 ex VAT

Further Reductions Available On Request 01276 505012

  • P130 Torch
  • P13019
  • Drag Cutting Shield

Description

Drag Cutting Shield P13019 For P130 Plasma Torches

A shield for drag cutting when using a P130 plasma torch, as supplied with the Oxford CUTMaker 1000, 1300 and TecArc OPTeCUT 95 and 125 plasma cutters.  The P13019 drag cutting shield can be used for plasma drag cutting at amperages of 85 – 130A.

 

Part number P13019 is the drag cutting shield used with a P130 plasma torch. Castleations allow contact between the workpiece and the shield during the cutting process. The crown like structure provides the optimum distance between the nozzle tip and the material.

 

WHEN TO REPLACE: Changeover of this consumable should be performed when the main orifice or ventilation holes become damaged or blocked. Failure to change these can result in poor cutting performance.

 

 

Additional information

Part:

3. Electrodes (Pack of 5), 4. Gas distributor, 5. Cutting tips 1.1mm (Pack of 10), 11. Retaining cap, 12. Double pointed spacer