Home » Oxford » Oxford Plasma Cutters » P13012 Cuting Tip / Nozzle 125A – P130 Plasma Torch

P13012 Cuting Tip / Nozzle 125A – P130 Plasma Torch

£26.00 ex VAT

Further Reductions Available On Request 01276 505012

  • P130 Torch
  • P13012 (Pack of 10)
  • Cutting Tip

Description

Cutting Tip P13012 (125A) For P130 Plasma Torches

Pack of 10 cutting tips for use with a P130 plasma torch, as supplied with the Oxford CUTMaker 1000, 1300 and TecArc OPTeCUT 95 and 125 plasma cutters.  The P13012 nozzles can be used for plasma drag cutting.

 

The nozzle focuses the plasma arc by funneling gas flow. The nozzle or tip orifice should be clean, symmetrical and the correct size to maintain cutting performance. As the tip or nozzle orifice is worn away with normal applications, the arc will get wider and less defined.

 

WHEN TO REPLACE: Changeover of this consumable should be performed when the orifice becomes damaged, the edges round off and mis-shapen. Failure to change these can result in poor performance.

 

The P13012 nozzle is for use when drag cutting up to 125A.

 

 

Additional information

Part:

3. Electrodes (Pack of 5), 4. Gas distributor, 5. Cutting tips 1.1mm (Pack of 10), 11. Retaining cap, 12. Double pointed spacer