Home » Cutting » Gas Welding and Cutting » Oxy Propane Cutting and Heating Set – Complete

Oxy Propane Cutting and Heating Set – Complete

£230.00 ex VAT

Further Reductions Available On Request 01276 505012

  • Oxy Propane
  • Cutting and Heating Set
SKU: Wallkit Category: Tag:



An Oxy Propane Heating and cutting kit, perfect for fabrication and automotive applications.  Ready to connect to most oxygen and propane cylinders, this kit has everything to get started with cutting metals as well as heating them.

Heating materials with Oxy Propane has real advantages in the workplace.  Oxy Propane heating can be used to bend materials, pre and post heat for welding, as well as localised heating to remove seized bolts etc.  Equipped flashback arrestors within the kit offer peace of mind and safety during operation.


Included in the kit:

  • Single stage 2 gauge Oxygen regulator – 300 Bar
  • Single stage 2 gauge side entry Propane regulator – 25 Bar
  • Heavy Duty / Type 5 Shank
  • Heavy Duty / Type 5 Cutting Attachment
  • In line Oxygen flashback arrestor
  • In line fuel flashback arrestor
  • 5 Meter 10mm blue oxygen hose fitted with 3/8″ check valve
  • 5 Meter 10mm orange propane hose fitted with 3/8″ check valve
  • PNM cutting nozzle 1/32″ – suitable for cutting 3 to 6mm plate thickness.
  • PNM cutting nozzle 3/64″ – suitable for cutting 5 to 12mm plate thickness.
  • Single flint lighter
  • Combination spanner
  • Heating Nozzles H1 and H2
  • Propane Heating Neck
  • Propane Type 5 Mixer



  • Gas regulators should be replaced/inspected every 5 years.  The Oxygen and Propane gas regulators supplied in this kit are date stamped as per CP7 requirements as detailed by the British Compressed Gases Association (BCGA).  Regulators supplied have 2 gauges – one with cylinder contents showing pressure and the other gauge shows outlet pressure.  The regulators have a forged brass body and colour coded knobs for clear identification of gas type – Orange for propane and blue for Oxygen.  5/8 BSP inlet and 3/8 BSP outlet.  Regulators conform to ISO 2503 standards.


  • 2 X Non-resettable flashback arrestors included for use with Oxygen and Propane gases with 3/8 BSP connections respectively. Fitted next to the regulator and before the fuel gas hose, a flashback arrestor is an essential safety device when using oxy fuel equipment.  The main function of the flashback arrestor is to prevent gas mixtures from occurring with potentially very dangerous consequences. An FBA (Flashback arrestor) should be fitted to both the Fuel gas and Oxygen hose lines. A fuel gas FBA has a left hand thread, whilst Oxygen flashback arrestors have a right hand thread. The difference in thread direction is another safety device to stop a mix-up of equipment and potential gas mixtures being possible.


  • 10mm 5 metre length gas hoses included with 3/8″ check valve (one way) safety devices fitted one end and a hose tail and 3/8″ nut the other.  Assembled and tested conforming to ISO 1256:2006, manufactured from EPDM compound for high abrasion and weather resistance, with high compression fittings and flame trap hose check valves.  Each hose is dated to signify when they are due to be changed as per CP7 guidelines.


  • The heavy duty / type 5 shank has 2 valves for start up and shut down procedures for mixing oxygen and fuel.  Male connections fit onto the supplied hoses with the red valved connection having a LH thread for the fuel gas and the blue valved connection with a RH thread for connection with the Oxygen hose.


  • Also included is a cutting attachment which fits to the shank.  The attachment takes propane nozzle mix (PNM) nozzles to allow for cutting


  • A propane mixer and heating neck allow the user to change from cutting to heating and the H1 and H2 nozzles provided attach to it


  • Cutting nozzles are also supplied within the kit.  With a PNM 1/32″ nozzle for cutting 3 to 6mm materials and a 3/64″ nozzle for 5mm -12mm.



Additional information

Weight 15 kg