Home » Cutting » Gas Welding and Cutting » Oxy Acetylene or Propane NM18/90 Cutting Torch – Premium

Oxy Acetylene or Propane NM18/90 Cutting Torch – Premium

£32.25 ex VAT

Further Reductions Available On Request 01276 505012

  • 18″ Length, 90° Head
  • Oxy Propane / Oxy Acetylene
  • Cuts up to 300mm
SKU: NM18/90M Category:



A premium quality cutting torch, the NM18/90 blowpipe is 18 inches in length and has a 90º head.  Suitable for use with Oxy Propane or Oxy Acetylene, these good quality torches conform to ISO 5172 and can cut up to 12″ (300mm) in mild steel*.  The premium cutting torch comes equipped with a lever latch.

*When used with correct nozzle

The handle incorporates a lever valve for on/off and 2 valves for manual control of oxygen/fuel mix at the torch for optimal flame adjustment.  Connections on the bottom of the cutting torch are 3/8 BSP male thread to accept a right hand threaded nut for Oxygen and left hand thread for fuel.


  • Cuts to 12″ (300mm) in mild steel with Oxy Acetylene
  • Solid construction
  • Nozzle mix design for maximum safety
  • Backfire resistant design
  • Easy grip control knobs for simple and safe operation
  • Robust lever latch for on/off control
  • Gas valves fitted with stainless steel stems and double O Ring seals
  • Accepts ANM(Acetylene) and PNM(Propane) Cutting Nozzles
  • Works with Acetylene or Propane as fuel gas dependent upon nozzle selection
  • Fitted with standard 3/8 BSP hose connections


CP7 Guidance
  • Hoses being used with the torch should be the correct type for the gas and fitted with check valves (non-return).  They are colour coded according to the gas they are designed for – red for acetylene, orange for propane and blue for oxygen.
  • Flashback arrestors should be installed on the regulator side of the hose.


Additional information


5 metre, 10 metre, 20 metre