Home » Welding Supplies » TIG Welding Supplies » TIG Welding Torch Spares » Inverter Fusion 7 Pin Switch Plug For Inverter Fusion TIG Welders

Inverter Fusion 7 Pin Switch Plug For Inverter Fusion TIG Welders

£42.50 ex VAT

Further Reductions Available On Request 01276 505012

  • 7 Pin TIG Switch Plug
  • HF Plug
  • Fits Inverter Fusion machines



A 7 pin switch plug designed to be used with Inverter Fusion TIG Machines with a 7 pin socket.

The plug fits onto the switch cable of a TIG torch or foot control and plugs into the front of the machine.  The pins control the on/off functionality of the TIG torch.  Additional pins can be connected to torch or foot control wires for potentiometer amperage control.

To open the amphenol plug, simply hold the front end and unscrew the rear to access the back of the pins. The relevant wires from the TIG torch or foot control can then be soldered on to the pins. The plastic screw cover centre section of the plug provides additional splash protection.  The Amphenol plug has a two screw clamp for holding the cable in place and preventing the switch wire from pulling out.

Details outlining wiring and pin configuration can normally be found in the reference material for the welding machine being used.  2 wires from the torch or foot control will complete a switch circuit.  If wires are attached to pins for amperage control, there will be 2 potentiometer connections and one for the wiper.


Need a TIG torch ready to plug and play?  No problem, feel free to let us know and we can quote for a complete TIG torch with connections to suit your machine.

Please Note – Product image shown is a generic switch plug