Home » Hypertherm » Hypertherm Plasma Torch Consumables » Hypertherm Powermax 45XP Consumables » Hypertherm Powermax 45XP Plasma Torch Marking Nozzle (Pack 5) – 420415

Hypertherm Powermax 45XP Plasma Torch Marking Nozzle (Pack 5) – 420415

£33.25 ex VAT

Further Reductions Available On Request 01276 505012

  • Duramax Plasma Torch nozzles (x5)
  • Consumable – 45XP
  • Genuine Hypertherm
SKU: 420415 Category:



A pack of 5 genuine Hypertherm plasma torch nozzles specifically for marking and precision gouging for the Duramax torch as used with the Powermax 45XP plasma cutter.  Perform marking of metal plates or lightly gouge such as around spot welds.

The nozzle focuses the plasma arc by funneling gas flow.  The nozzle or tip orifice should be clean, symmetrical and the correct size to maintain cutting performance.  As the tip or nozzle orifice is worn away with normal applications, the arc will get wider and less defined.


WHEN TO REPLACE:  Changeover of this consumable should be performed when the orifice becomes damaged, the edges round off and mis-shapening.  Failure to change these can result in poor performance.  Hypertherm have produced a video on when to change nozzles.


The 420415 nozzle is for use when marking or precision gouging between 10 and 25A.

For use with standard 45XP torch consumables with a specific marking shield – see related items below.

Additional information


3. Electrodes (Pack of 5), 4. Gas distributor, 5. Cutting tips 1.1mm (Pack of 10), 11. Retaining cap, 12. Double pointed spacer