GYS MULTI-PEARL MIG 200-4 XL
Bigger brother of the GYS Multi Pearl 200-2, the 200-4 XL is a larger machine capable of running 10 and 15kg wire spools. An industrial 4 roll wire feed also assists with consistent wire feed speed and is a bonus if welding aluminium.
Popular in the automotive industry, the GYS Multi-pearl is a synergic MIG welding machine with pre-set optimum welding parameters. Simply select material type, wire diameter, welding position and material thickness and the Multi pearl will dial in optimum settings for the perfect weld. A trim feature then allows the user to fine tune the settings as required. Prefer manual settings? No problem, set machine to manual mode to set machine as you would like.
Extremely compact, these machines are excellent for workshop and garage use.
MULTI PROCESS WELDER
Advanced inverter technology allows 3 processes from one machine:
MIG/MAG – The MULTIPEARL 200-4 XL is suitable for 10Kg and 15Kg wire reels
An industrial wire feed motor drives 4 rollers to ensure consistent wire feed speeds
The MIG-MAG process can be used in manual or Synergic mode.
TIG – Capable of lift TIG welding. Simply touch tungsten to workpiece and lift to begin
Connect to a euro connecting TIG torch to make use of the machines automatic shielding gas system with adjustable post gas and downslope.
MMA – Stick welding possible using the included electrode holder lead
Capable of welding any type of electrodes except Aluminium and Cellulosic up to Ø5mm, this machine is perfect for stick welding.
Hot start and arc force make stick welding easier and both are adjustable from 0 – 100%
Wire speed and voltage are automatically adjusted when the following settings are inputted:
- Wire type and diameter
- Thickness of metal to weld
- Gas used
- Welding position
Trim both wire speed and arc length as required.
- LCD screen clearly displays weld settings and makes for easy adjustment
- PFC – Power factor correction technology ensures efficiency of the machine to offer a 30% energy saving
- Flexible voltage enables the machine to run on a power supply from 85V to 265V
- Combining these two technologies makes the device suitable for using an extension lead up to 100m.
- Tested in the factory against overvoltage up to 400V.
- Generator friendly (when used with a generator of suitable size and spec – see below)
- Suitable for 0.6 – 1.0mm wire sizes and 0.9 – 1.2mm gasless wire
SUPPLIED WITH: Power source with euro connecting 3m genuine Binzel MIG torch, 2.5m work return lead, 2m MMA electrode holder lead and operating instructions
Rollers supplied: 0.6 – 0.8mm
Torch set up for 0.8mm
|Input Supply 50/60Hz||Fuse amps||Amperage range MMA||Amperage range TIG||Amperage range MIG||60% Duty Cycle||Duty Cycle||Dimensions / Weight||Generator requirements (+/-15%)|
|30 – 130A
10 – 200A
|10 – 180A
10 – 200A
|20 – 150A
20 – 200A
200A @ 20%
|69 x 65.5 x 38.5 cm / 25.5kg||7.5kW|
WHERE IS IT MADE
GYS is a family run company with its main factory in France. The Multi pearl range is manufactured in France.
WARRANTY AND SUPPORT
All GYS machines come with a 2 year warranty which is upheld by their large UK headquarters now situated in Rugby.