Home » Welding Supplies » TIG Welding Supplies » GrabPak 5356 Aluminium TIG Wire AlMn (2.4mm) 0.5kg

GrabPak 5356 Aluminium TIG Wire AlMn (2.4mm) 0.5kg

£11.50 ex VAT

Further Reductions Available On Request 01276 505012

  • GrabPak 5356
  • 0.5kg Pack – 2.4mm
  • Aluminium Magnesium

Description

GrabPak 5356 TIG Rods (2.4mm) – AlMn 0.5kg

AWS A5.10 92 ER5356 EN 18273-S 2004 AL5356

A 0.5kg GrabPak of 5356 Aluminium TIG rods (2.4mm).  5356 Aluminium TIG wire is suitable for welding magnesium bearing aluminium, alloys such as 5251 (N4), 5154 (N5), 5454 (N51), and also heat treatable alloys 6063 (H9), 6061 (H20) and 6082 (H30).

Super handy, these grab packs are great for hobbyists needing smaller quantities of rods or for small maintenance jobs.  Perfect also for site work, these grab packs are supplied in a plastic re-useable tube to keep them dry and undamaged.

Designed for use as general purpose aluminium TIG filler wire, by combining 5% magnesium which provides excellent corrosion resistance and unprecedented strength.

As a result of its high shear and tensile strength, 5356 Aluminium TIG Rods are a popular choice for most types of TIG welding with aluminium.  Additionally perfect for use in all welding positions except vertical down.

Used for applications involving the construction of boats, bicycles, trucks, pressure vessels, storage tanks, railways and automotive works. 5356 TIG Filler is also suitable for welding components that need to be anodised.

Features & Benefits
  • Suitable for welding components that require anodising.
  • Excellent corrosion protection
  • High levels of shear and tensile strength
  • Suitable for most types of welding
  • Ideal for use in all welding positions except vertical down.
  • Compatible with for use with heat treatable alloys
Industries / Applications
  • Automotive Sector
  • Storage Tanks
  • Pressure Vessels
  • Boat Construction
  • Structural Welding
What is weld cracking?

Weld cracking can have very significant consequences particularly as it increases high-stress intensity.  As a result, this can cause unexpected weld failure.  Weld cracking is broken down into two categories as detailed below:

  • Hot Cracks – Formed during the cooling process immediately after welding.
  • Cold Cracks – When there has been a delay between the crack forming and the weld being finished.

Additionally, weld cracking can occur during the weld process itself which is likely to be caused by fatigue or corrosion. Treatment of a weld crack will vary depending on how and at what stage the crack has formed.  This must be established first before any corrective action is taken.

Chemical Composition
Si% Fe% Cu% Mn% Mg%
0.0401 0.1561 0.0014 0.1140 4.8277
Cr% Zn% Ti% Be% Al%
0.1383 0.0048 0.0939 <0.0001 Rem.

 

Mechanical Properties

Tensile Strength ≥235 MPa
Yield Strength ≥110 MPa
Elongation ≥17 %
Impact Strength ≥16 J

 

Mechanical properties are approximate and may vary based on the heat, shielding gas, welding parameters and other factors.

Shielding Gases

EN ISO 14175 – TIG: I1, I3

 

Welding Positions

EN ISO 6947 – PA, PB, PC, PD, PE, PF, PG

 

Typical Base Materials

AlMg3, AlMg4, AlMg5,AlMgSi0.5, AlMgSi1; AlMgMn, AlZnMg1, G-AlMg3Si, G-AlMg5Si, G-AlMg10, AlMg1SiCu, AlMgSi0,7, AlZn4,5Mg1, AlSi1MgMn, AlSiMg(A), 3.3545, 3.3206, 3.3210, 3.2315, 3.3211, 3.4335, EN AW 5086, EN AW 6060, EN AW 6005A, EN AW , EN AW 6061, EN AW 7020, EN AC 51400, EN AC 51300, EN AC 51100, EN AW 5454*

* Illustrative, not exhaustive list

 

Standards
EN ISO 18273 – S Al 5356 (AlMg5Cr(A))
AWS A5.10 – ER 5356
In Conclusion

As shown above, GrabPak 5356 AlMn TIG filler wire has excellent resistance to corrosion.  Additionally good levels of both shear and tensile strength.  Furthermore, use 5356 filler wire for welding components that require anodising.  Overall, the 0.5kg GrabPak size is ideal for small maintenance jobs and projects.

Reviews

There are no reviews yet.

Be the first to review “GrabPak 5356 Aluminium TIG Wire AlMn (2.4mm) 0.5kg”