ESAB 2 Pin Switch Plug

£12.50 ex VAT

Further Reductions Available On Request 01276 505012

  • 2 Pin TIG Switch Plug
  • TIG Torch Spare
  • Fits ESAB machines



An ESAB 2 Pin Switch Plug designed to be used with both ESAB and Murex TIG Machines with a 2 pin socket. The switch plug, sometimes referred to as a HF plug is the connection to the TIG welder for torch trigger control.

They fit onto the switch cable of a TIG torch or foot control and plug into the front of the machine.  The pins control the on/off functionality of the TIG torch.

To open the amphenol plug, simply hold the front end and unscrew the rear to access the back of the pins. The relevant wires from the TIG torch can then be soldered on to the pins. The plastic screw cover centre section of the plug provides additional splash protection.  The Amphenol plug has a two screw clamp for holding the cable in place and preventing the switch wire from pulling out.

Details outlining wiring and pin configuration can normally be found in the reference material for the welding machine being used.