Home » Welding » Welding Fume Extractors » Electac P1 Welding Fume Extraction Fan With Capture Hose – 0.75kW

Electac P1 Welding Fume Extraction Fan With Capture Hose – 0.75kW

Further Reductions Available On Request 01276 505012

  • Fume Extraction Fan
  • 230V or 110V 0.75kW
  • Vents Fume to Atmosphere
Clear selection

Description

ELECTAC P1 WELDING FUME EXTRACTION FAN WITH CAPTURE HOOD AND HOSE – 0.75kW

Ideal for mobile work, the Electac P1 fan unit is designed to extract welding fume from the source and expel it into the atmosphere.  A portable unit, the lightweight fan has 2 hoses connected to it, one to extract the welding fume or dust and the other to exhaust it to atmosphere.  Simply place the fan down and connect to a power source, run the 6 metre long supplied hose to the welding area and position the capture hood with its magnetic base.  The 2.5 metre exhaust hose can be positioned with the end venting to outside.

These vent to atmosphere fan and hose packages are ideal for a low cost welding fume extraction solution, with no running costs (no disposable filters).  Portable welding fume extractors often come with small capture hoods and hoses which results in frequent repositioning to ensure the fume is extracted.  The hoses supplied are 160mm diameter, the same as you would get on a larger LEV system.

 

Designed for carrying to the working area, these units are perfect for mobile welders who may need to visit sites and will need to comply with HSE for indoor welding.

Built in Britain, the Electac units are well built and well priced to buy.

 

AVAILABLE AS 230 OR 110V MAINS INPUT

 

KEY FEATURES
  • Portable and rugged design suitable for carrying to the work area
  • Available as 110V or 230V – perfect for on site work.
  • Very lightweight – only 22kg
  • Handle for ease of handling
  • Extracts harmful welding fume and vents to atmosphere

 

PRODUCT SPECIFICATIONS
Model P1
Motor power 0.75kW
Rated input voltage 110 or 230V
Airflow – Freeblowing 1900 m3/hour
Hose supplied as standard 160mm
Dimensions 425 x 330 x 390mm
Weight 22 KG

 

SUPPLIED WITH:  A 6m length of extraction hose, 160mm in diameter with capture hood and magnetic base. 2.5m exhaust hose

 

IMPORTANT INFORMATION

When considering LEV systems for the workplace, its worth looking at the governments health and safety executive guidance to ensure any equipment is fit for purpose.

Not sure which fume extraction solution to go for?  Feel free to contact us and we can make sure you have the appropriate information to select the right extraction for your welding tasks.

 

PLEASE NOTE:  These carry around welding fume extractors are made to order, right here in the UK.  Lead time is usually a couple of days but should you need it sooner, you are welcome to call us and we can check lead times for you.

Additional information

Mains Voltage

110V, 230V