Home » Welding » Welding Fume Extractors » Electac P1 Welding Fume Extraction Fan With 2 Capture Hoses – 1.1kW

Electac P1 Welding Fume Extraction Fan With 2 Capture Hoses – 1.1kW

Further Reductions Available On Request 01276 505012

  • Fume Extraction Fan
  • 230V or 110V 1.1kW
  • Vents Fume to Atmosphere
Clear selection

Description

ELECTAC P1 DOUBLE OPERATOR WELDING FUME EXTRACTION FAN – 1.1kW

Ideal for mobile work, the Electac P1 fan unit is designed to extract welding fume from the source and expel it into the atmosphere.  This unit is supplied as a double operator fume extraction unit, which has 3 hoses connected to it, two to extract the welding fume simultaneously and the other to exhaust it to atmosphere.

Simply place the fan down and connect to a power source, run the 6 metre long supplied hoses to the welding areas and position the capture hoods with their magnetic bases.  The 2.5 metre exhaust hose can be positioned with the end venting to outside.

This 1.1kW version is supplied with two 6 metre extraction hoses with capture cowls, a T piece to branch off of the fan and the exhaust hose.

These vent to atmosphere fan and hose packages are ideal for a low cost welding fume extraction solution, with no running costs (no disposable filters).  Portable welding fume extractors often come with small capture hoods and hoses which results in frequent repositioning to ensure the fume is extracted.  The hoses supplied are 160mm diameter, the same as you would get on a larger LEV system.  As a double operator machine, these represent even better value for money, allowing two welders to safely work, extracting with one fan.

 

Designed for carrying to the working area, these units are perfect for mobile welders who may need to visit sites and will need to comply with HSE for indoor welding.

Built in Britain, the Electac units are well built and well priced to buy.

 

AVAILABLE AS 230 OR 110V MAINS INPUT

 

KEY FEATURES
  • Portable and rugged design suitable for carrying to the work area
  • Available as 110V or 230V – perfect for on site work.
  • Very lightweight – only 24kg
  • Handle for ease of handling
  • Extracts harmful welding fume and vents to atmosphere

 

PRODUCT SPECIFICATIONS
Model P1
Motor power 1.1kW
Rated input voltage 110 or 230V
Airflow – Freeblowing 2100 m3/hour
Hose supplied as standard 160mm
Dimensions 425 x 330 x 390mm
Weight 24 KG

 

SUPPLIED WITH: 6m lengths of extraction hose and T piece, 160mm in diameter with capture hoods and magnetic base (x2). 2.5m exhaust hose

 

IMPORTANT INFORMATION

When considering LEV systems for the workplace, its worth looking at the governments health and safety executive guidance to ensure any equipment is fit for purpose.

Not sure which fume extraction solution to go for?  Feel free to contact us and we can make sure you have the appropriate information to select the right extraction for your welding tasks.

 

PLEASE NOTE:  These carry around welding fume extractors are made to order, right here in the UK.  Lead time is usually a couple of days but should you need it sooner, you are welcome to call us and we can check lead times for you.

Additional information

Mains Voltage

110V, 230V