Home » Welding » Welding Fume Extractors » Electac Articulated Welding Fume Extraction Arm Package 1.1kW

Electac Articulated Welding Fume Extraction Arm Package 1.1kW

Further Reductions Available On Request 01276 505012

  • Vent to Atmosphere
  • 0.75kw Fan
  • 1900M³/hr
Clear selection
SKU: N/A Category:

Description

Electac Vent to Atmosphere Welding Fume Extraction Package

A single operator articulated arm and 1.1kW fan package for extracting welding fume to atmosphere.  The self supporting extraction arm is ideal for positioning the capture cowl near to the welding fume source.

The arms can swivel up to 360 degrees (dependant on fixings) & have full movements vertically. In addition, the capture nozzle has two planes of movement. This enables operation from the full radius of the arm to just under the arm mounting.

 

A basic solution to welding fume extraction, a VTA (vent to atmosphere) set up simply sucks the fume through the hood/arm and out through a vent to the atmosphere outside the workshop/factory.

This Electac 1.1kW fan package includes a 4m length articulating arm with capture hood and a 230 or 400V 1.1kW fan (choose from dropdown above), as well as a 2.5m x 160mm flexible exhaust hose.  This 1.1kW fan extracts up to 2200m3/hr.

Filter modules are also available that enable the fumes to be filtered & the cleaned air returned to the work area (Please call to ask)

The suction arm consists of an internal linkage made of aluminium. Due to the convenient arrangement of the springs it is very easy to move the suction arm in every requested position. It is possible to turn the suction hood with integrated throttle valve in every direction too for ultimate flexibility.

 

Vent to outside or atmosphere systems are not suitable for all welding fume extraction solutions.

A few factors to consider:

  • In winter, any warm air will be sucked through the extraction hood and taken outside.
  • Where is the fume being extracted / vented to?

If the above points are of concern, a recirculating, filter system may be more beneficial.

 

 

For assistance with your welding fume extraction requirement, feel free to call and one of our team would be happy to assist.

 

PLEASE NOTE:  Image is for illustrative purposes only and may differ to that supplied.

Additional information

Fan Voltage

230V, 400V