Cebora Power Rod 250T Inverter Welder
THREE-PHASE INVERTER FOR MMA AND DC TIG WELDING
The Cebora Power Rod 250T-CELL is a robust and portable inverter welder. Suitable for MMA and DC TIG/Pulsed TIG Welding with “Cebora Lift Ignition”, all controlled via a simple and intuitive control panel.
Upgradable machine software stored in the on-board flash memory. Sophisticated control of the short circuit condition and drop transfer via the “Hot Start” and “Arc Force” functions. In hot start, the machine senses the electrode contacting the workpiece and delivers a peak current to provide easier arc starts. Arc force or “dig force” operates during the weld and delivers peak current when a short circuit is detected to prevent sticking and maintain a stable arc.
The power source can be connected to a remote control, which controls the current and a digital ammeter which reads the welding current.
It is possible to weld cellulosic electrodes by means of a specialized program available on the control panel.
- DC Inverter Power Source
- 400V Supply
- MMA/TIG LIFT System
- Rutile Basic
- 5mm-4.0mm Electrodes
- Digital Ammeter
- Robust and Portable Design
- Adjustable Hot Start
- Adjustable Arc Force
- Generator Compatible
- 210amps @ 60% Duty Cycle
- Runs cellulosic rods
Dimensions: 207 x 437 x 411 mm
Optional: MMA Accessory Kit (ART1284.05), TIG Torch (ART1567.01), Trolley (ART1656), Foot Control (ART181), Remote Pendant (ART187), Extension Cable (ART1192), TIG/Foot Control Adaptor (ART1180)
Complies with EN 61000-3-12.
|400 V 50/60 Hz
|10 A||Fuse rating (slow blow)|
|9,2 kVA 30%
7,3 kVA 60%
6,5 kVA 100%
|10 ÷ 250 A||Current adjustment range|
|250 A 30%
210 A 60%
190 A 100%
|Duty Cycle (10 min.40°C)
According to IEC 60974-1
|Ø 1,5 ÷ 4,0||Electrodes that can be used|
|207x437x411 mm||Dimensions (WxLxH)|
MADE IN ITALY AND BACKED UP BY CEBORA UK.