Home » Cebora » Cebora MIG Welders » Cebora EVO 450 TS Synergic – MIG/MAG

Cebora EVO 450 TS Synergic – MIG/MAG

£3,900.00 ex VAT

Further Reductions Available On Request 01276 505012

  • Current Range: 40 – 500 Amps
  • Three Phase
  • Weight: 125 Kg


Cebora EVO 450 TS Synergic – MIG/MAG Welder

Call Now For Best Prices  01276 505012

The Cebora EVO 450 TS forms part of the EVO line up.  The EVO Synergic range consists of not only a “product family look” but mainly a standardization of components such as the same control circuit in the EVO range machines.

The EVO TS synergic range is made up of two three-phase power sources of 350 and 450A at 40% respectively.

The Cebora EVO 450 TS can be utilized with 2 roll (art. 1652, with Ø 30 mm rollers) or 4 roll (art. 1662, with Ø 40 mm rollers) wire feed units.  Each are available separately here at TBWS.  The wire feed units are capable of 20 and 24m/min respectively and are both fitted with digital ammeter/volt meters and equipped with a “burn-back” adjustment device.  This encourages smooth restarting thanks to wire speed control during arc shut off.

The EVO 450 TS has a range of synergic curves in memory for mild and stainless steel, aluminium, MIG brazing and flux cored wire.

The microprocessor used in the new control circuit makes it possible to upgrade, even over a long period, the synergic programs stored in the machine by means of the optional kit art. 136

An optional Cebora torch cooling unit is also available for the EVO 450 TS.


Complies with EN 61000-3-12.


Art. 647 Specifications
230V-400V 50/60 Hz


Three phase input
50 A 32 A

(230 V) (400 V)

Fuse rating (slow blow)
23,5 KVA 40%

16,6 KVA 60%

11,8 KVA 100%

Input power
40A ÷ 500A Min.-max. current that can be obtained in welding
450A 40%
370A 60%
290A 100%
Duty Cycle (10 min.40°C)
According to IEC 60974.1
4×8 Number of regulation steps
0,8/0,9/1,0/1,2/1,6 Fe
1,0/1,2/1,6 Al
0,8/0,9/1,0/1,2 Inox/
0,9 Cu-Si 3%
1,2 Cored
Wire size that can be used
Ø 300 mm / 15 Kg Max. wire spool size
IP 21 S Protection class
125 Kg Weight
615x975x900H Dimensions mm


There are no reviews yet.

Be the first to review “Cebora EVO 450 TS Synergic – MIG/MAG”