Cebora EVO 350 TS Synergic – MIG/MAG Welder
Call Now For Best Prices 01276 505012
The Cebora EVO 350 TS forms part of the EVO line up. The EVO Synergic range consists of not only a “product family look” but mainly a standardization of components such as the same control circuit in the EVO range machines.
The EVO TS synergic range is made up of two three-phase power sources of 350 and 450A at 40% respectively.
The Cebora EVO 350 TS can be utilized with 2 roll (art. 1652, with Ø 30 mm rollers) or 4 roll (art. 1662, with Ø 40 mm rollers) wire feed units. Each are available separately here at TBWS. The wire feed units are capable of 20 and 24m/min respectively and are both fitted with digital ammeter/volt meters and equipped with a “burn-back” adjustment device. This encourages smooth restarting thanks to wire speed control during arc shut off.
The EVO 350 TS has a range of synergic curves in memory for mild and stainless steel, aluminium, MIG brazing and flux cored wire.
The microprocessor used in the new control circuit makes it possible to upgrade, even over a long period, the synergic programs stored in the machine by means of the optional kit art. 136
An optional Cebora torch cooling unit is also available for the EVO 350 TS.
Complies with EN 61000-3-12.
|230V-400V 50/60 Hz
|Three phase input|
|40 A 25 A
(230 V) (400 V)
|Fuse rating (slow blow)|
|15,9 KVA 40%
10,7 KVA 60%
7,6 KVA 100%
|35A ÷ 400A||Min.-max. current that can be obtained in welding|
290A 60%220A 100%
|Duty Cycle (10 min.40°C)
According to IEC 60974.1
|2×8||Number of regulation steps|
0,9 Cu-Si 3%
|Wire size that can be used|
|Ø 300 mm / 15 Kg||Max. wire spool size|
|IP 21 S||Protection class|