CEBORA EVO 350 TC SYNERGIC – MIG/MAG COMPACT
Call Now For Best Prices 01276 505012
The Cebora EVO 350 TC forms part of the EVO line up. The EVO Synergic range consists of not only a “product family look” but mainly a standardization of components such as the same control circuit in the EVO range machines.
By utilizing the Cebora 2003 Push-Pull MIG torch the EVO Synergic power source is also suitable for welding aluminium materials. Connection of the Cebora Push-Pull torch activates specific synergic programs the Cebora has created for aluminium wires starting at a gauge of Ø 0.6.
The power sources are each fitted with aluminium wire feeders (4 rollers on the Cebora EVO TC Synergic) and 12 welding current positions (16 positions on the 350 TC).
The Cebora 350 TC has a number of pre-programmed Synergic curves, and are especialy recommended for MIG brazing of both high strength steels and galvanized sheet metal.
The microprocessor used in the new control circuit makes it possible to upgrade, even over a long period, the synergic programs stored in the machine by means of the optional kit art. 136.
Three different types of torches may be used: Standard MIG, Push Pull 2003, and Spool Gun (only the manual function is active with the Spool Gun). The EVO synergic power sources are suitable for use in the automotive and for light/medium metal fabrication.
Complies with EN 61000-3-12.
|230-400V 50/60 Hz
|Three phase input|
|40 A 25 A
|Fuse rating (slow blow)|
|15,9 KVA 40%
10,7 KVA 60%
7,6 KVA 100%
|35A ÷ 400A||Min.-max. current that can be obtained in welding|
290A 60%220A 100%
|Duty Cycle (10 min.40°C)
According to IEC 60974.1
|2×8||Number of regulation steps|
0,9 Cu-Si 3%
|Wire size that can be used|
|Ø 300 mm / 15 Kg||Max. wire spool size|
|IP 21 S||Protection class|