Description
Alfra Mag Drill HSS Cutter 63mm
Designed for use with magnetic drilling equipment for cutting holes into metal plates. Has an internal bore of 6.35mm and a universal 19mm Weldon Shank. Available as short (25mm) or long (50mm) versions. These Alfra cutters are made from a special quality high speed steel. Ground section has high performance toothing with a pre and post cutter.
Technical Spec.
- Diameter: 63mm
- Cutting depth: 25mm (short) or 50mm (Long)
- Shank: Universal 19mm weldon
- Internal bore: 6.35mm
- Steel quality: Special quality high speed steel
- Ground section: High-performance toothing with pre and post cutter
Suitable For
- Alfra Rotabest (weldon)
- Alfra Rotaquick quick-change system
- BDS
- Bux
- Ruko
- Magnetor
- Eurobore
- Universal
- Nitto Jei
- Hougen
- Magtron
- Promac
- Rotabroach
- All types of mag drills with a weldon shank
Cutting fluid will greatly benefit cutters by reducing friction, it will improve the finish of the surface and decrease cutting time. Which in turn will increase the longevity of the cutter. The pilot pin accurately aligns the cutter, allows for internal lubrication and makes for easier removal of the slug. During drilling, the pilot pin retracts and allows internal coolant to reach the cutting teeth.
Looking to buy Alfra HSS Cutters in bulk? Feel free to ask and see if we can offer a price reduction.
Please note: 10mm and 11mm cutters require stepped pilot pins
Disclaimer: Due to its small diameter, we cannot be held responsible if the cutter breaks. We will not replace the cutter if breakage occurs.
