Home » Alfra » Alfra Mag Drill HSS Cutter 52mm

Alfra Mag Drill HSS Cutter 52mm

Further Reductions Available On Request 01276 505012

  • 52mm
  • High Speed Steel (HSS)
  • Weldon Shank Fitting
Clear selection
SKU: N/A Categories: ,

Description

Alfra Mag Drill HSS Cutter 52mm

Designed for use with magnetic drilling equipment for cutting holes into metal plates.  Has an internal bore of 6.35mm and a universal 19mm Weldon Shank. Available as short (25mm) or long (50mm) versions.  These Alfra cutters are made from a special quality high speed steel. Ground section has high performance toothing with a pre and post cutter.

Technical Spec.

  • Diameter: 52mm
  • Cutting depth: 25mm (short) or 50mm (Long)
  • Shank: Universal 19mm weldon
  • Internal bore: 6.35mm
  • Steel quality: Special quality high speed steel
  • Ground section: High-performance toothing with pre and post cutter

Suitable For

  • Alfra Rotabest (weldon)
  • Alfra Rotaquick quick-change system
  • BDS
  • Bux
  • Ruko
  • Magnetor
  • Eurobore
  • Universal
  • Nitto Jei
  • Hougen
  • Magtron
  • Promac
  • Rotabroach
  • All types of mag drills with a weldon shank

Cutting fluid will greatly benefit cutters by reducing friction, it will improve the finish of the surface and decrease cutting time. Which in turn will increase the longevity of the cutter.  The pilot pin accurately aligns the cutter, allows for internal lubrication and makes for easier removal of the slug.  During drilling, the pilot pin retracts and allows internal coolant to reach the cutting teeth.

Looking to buy Alfra HSS Cutters in bulk? Feel free to ask and see if we can offer a price reduction.

Please note: 10mm and 11mm cutters require stepped pilot pins

Disclaimer: Due to its small diameter, we cannot be held responsible if the cutter breaks. We will not replace the cutter if breakage occurs.

Additional information

Length

25mm (Short), 50mm (Long)