Home » Cutting » Gas Welding and Cutting » AHT 25 Oxy Acetylene Heating Nozzle

AHT 25 Oxy Acetylene Heating Nozzle

£6.54 ex VAT

Further Reductions Available On Request 01276 505012

  • AHT25 Heating Nozzle
  • Oxy Acetylene
  • 52,000 BTU
SKU: AHT25 Category:

Description

OXY ACETYLENE HEATING NOZZLE NO. 25

A No 25 size Oxy Acetylene heating nozzle for use with a type 5 HD shank and acetylene heating neck.

 

Sometimes called a pepperpot, these heating nozzles are perfect for heating materials with oxy acetylene.

Can be used for pre heating for welding applications, brazing and heating for bending, forming or straightening metals.

 

Smaller size nozzles are often used for brazing or for applying hard-facing metal to large areas.

Key Features
  • Heating nozzle for oxy acetylene – Sometimes referred to as pepperpots
  • Heating BTU output 52,000

 

ABOUT HEATING NOZZLES

To fit to a heavy duty / type 5 shank:  Fit a type 5 heating mixer to the type 5 shank and an AHT heating neck screws into the mixer.  The nozzle screws onto the end of the swan neck.

 

Other Information:
  • Hoses being used with the torch should be the correct type for the gas and fitted with check valves (non-return).  They are colour coded according to the gas they are designed for – red for acetylene and blue for oxygen.
  • Flashback arrestors should be installed on the regulator side of the hose.
  • A nozzle should be inspected regularly to check for damage or obstructions.
  • A poorly maintained nozzle can cause turbulent gas flow and increases the risk of flashback.
  • Obstructions to the nozzle can be caused by dirt or spatter.
  • Correct setting of these nozzles is vital to ensure the fuel is burnt correctly.
  • Avoid a soft flame, if you have too much heat change to a smaller size.

 

Additional information

Length

5 metre, 10 metre, 20 metre