Home » Cutting » Gas Welding and Cutting » Oxy Propane Hose » 8mm Oxy Propane Gas Hose Fitted Sets

8mm Oxy Propane Gas Hose Fitted Sets

Further Reductions Available On Request 01276 505012

  • Oxy Propane
  • 8mm 3/8″ check valves
  • 5m, 10m or 20m length
Clear selection



Set of 2 high quality 8mm Oxygen and Propane hose assemblies conforming to BS EN 559 and ISO 3821:2010, manufactured from EPDM compound for high abrasion and weather resistance, with high compression fittings and flame trap hose check valves.  Check valves fitted to this 8mm hose are 3/8 inch BSP.

Sold as a set of 2 in a variety of hose length and hose diameter combinations to suit oxygen and propane cutting and brazing gases. Available in 5, 10 or 20 metres.  Choose from the drop down menu above to select


Further Information:

Also known as Siamese hose, these Weldability range of fitted hoses and hose sets are complete, ready-made gas-hose solutions, which remove the need for time-consuming hose nut, tail and check-valve attachment. They are manufactured to a level of quality beyond that achievable when manually constructed by hand, with the inclusion of high compression fittings at each end of the hose to ensure reliable, gas-tight connections to the hose check valve (at the regulator end) and hose-tail / hose-nut configuration (at the torch end).

Fitted hoses and hose sets are available in 6mm bore diameter with either 1/4” or 3/8” fittings, and 8mm or 10mm bore diameters and 3/8” fittings at each end. Blue hoses are used with oxygen, red hoses are used with acetylene, orange hoses are used with propane gas.

The FT on each part number signifies that the hoses are fitted with non-return flame traps.


Single fitted hoses also available as well as unfitted hose for acetylene, propane and oxygen.  Please call or email for price and availability.

Additional information


5 metre, 10 metre, 20 metre