Home » Welding Supplies » MIG Welding Supplies » 1.2mm 316LSi Stainless Steel MIG Wire GMAW ELOX SG | 5kg Spool

1.2mm 316LSi Stainless Steel MIG Wire GMAW ELOX SG | 5kg Spool

£54.50 ex VAT

Further Reductions Available On Request 01276 505012

  • GeKa GMAW 316LSi ELOX SG
  • Corrosion Resistant Stainless Steel
  • 5kg – 1.2mm



All positional 1.2mm 5KG spool of Stainless steel 316LSi MIG Wire from GeKa (GEDIK). Turkish-made MIG wire for use on a variety of materials on machinery, equipment, and surfaces within the food, chemical, medical, textile, shipbuilding, architectural, and sterile production industries.

316LSI grade is a good quality, molybdenum-bearing stainless steel with low carbon content for superior corrosion resistance for welding molybdenum bearing austenitic stainless steels. Particularly suited against where corrosive acids and chlorinated environments.

Solid-core MIG wire for use with shielding gas – recommended 2.5% Argon Mix (TBWS Provide Welding gas – Call for stock availability). Used for MIG Welding 13% ferritic stainless steels, high-carbon or stabilized stainless steels (316) and low carbon stainless steels (316L).

Resistant at low temperatures of down to -196°C and maintains its corrosion resistance at temperatures of up to 400°C (if this heat is exceeded for too long, you may see Intergranular Corrosion).

5KG Spools are typically for smaller MIG Machines. The hub size (centre barrel) of these spools is bigger than the 1KG (Spool Adaptor available) and the spool is physically smaller than 15KG.

Typical Base Material Grades

X2 CrNiMo 1814 3, X5 CrNiMo 17 13 3, X2 CrNiMo 1713 2, , X5 CrNiMo 1712 2, X6 CrNiMoTi 17 12 2, X6 CrNiMoNb 17 12 2, X2 CrNiMoN 1713 3, X2 CrNiMoN 1712 2

AISI: 316, 316Cb, 316L, 316Ti


Chemical Composition of Welding Wire % (Typical)
Carbon (C) Silicone (Si) Manganese / Magnesium (Mn) Chromium (Cr) Nickel (Ni) Molybdenum (Mo)
0.02 0.80 1.6 18.5 11.5 2.2
Mechanical Properties
Yield Strength (N/mm2) Tensile Strength (N/mm2) Impact Strength (ISO-V/+20°C) Elongation (Lo=5do) (%)
Min. 400 550 – 700 Min. 63 J Min. 30



Why use GeKa?

As one of the largest manufacturers of welding consumables in Europe, GEDIK WELDING provides outstanding quality supplies. GEDIK, based in Turkey, are leaders in the worlds of robotic welding and automated processes, and their advanced technology and quality assurance extends to their consumables range. GeKa is one of their registered trademarks that covers their catalogue of MIG wire, MMA electrodes, and TIG filler rods, in a wide range of materials.


GeKa G3Si 1 Welding Positions


TS EN ISO 14343-A G Z 19 12 3 L Si
EN ISO 14343-A G Z 19 12 3 L Si
AWS A5.9 ER 316 LSi


Please note that these 1kg spools will not fit all of our MIG welders.  If in doubt, please call and one of our team will happily advise.



There are no reviews yet.

Be the first to review “1.2mm 316LSi Stainless Steel MIG Wire GMAW ELOX SG | 5kg Spool”