GEKA GMAW 1.2MM 308LSi STAINLESS STEEL MIG WIRE ELOX SG – 15KG SPOOL
All positional 1.2mm 15KG spool of Stainless steel 308LSi MIG Wire from GeKa (GEDIK). 308 L Si MIG wire is a cheaper alternative stainless steel MIG wire to 316 with less corrosion resistance. 308 is often used when welding 304 grade materials.
Turkish-made MIG wire for welding 18 / 8 stainless steels for application in the food production, pharmaceutical, paper, cellulose, and general stainless steel fabrication industries.
308LSi is a low carbon stainless steel used for MIG welding on 13% Cr ferritic stainless steels, stabilized steels like 347, or steels of similar grades, including the commonly used steel grade: high-carbon 304.
Solid-core MIG wire for use with shielding gas – recommended 2.5% Argon Mix (TBWS Provide Welding gas – Call for stock availability).
Maintains its ductile performance at low temperatures of down to -196°C and its corrosion resistance at temperatures of up to 350°C (if this heat is exceeded for too long, you may see Intergranular Corrosion).
Typical Base Material Grades
X2 CrNi 19 11, X5CrNi 18 10, X6 CrNiTi 18 10, X6 CrNiNb 18 10, X2 CrNiN 18 10, X10 CrNiNb 18 1O
AISI & ASTM: 304, 304L, 304LN, 321, 347, A320Gr.B8C, A320Gr.B8D
Chemical Composition of Welding Wire % (Typical)
|Carbon (C)||Silicone (Si)||Manganese / Magnesium (Mn)||Chromium (Cr)||Nickel (Ni)|
|Yield Strength (N/mm2)||Tensile Strength (N/mm2)||Impact Strength (ISO-V/+20°C)||Elongation (Lo=5do) (%)|
|Min. 400||550 – 700||Min. 63 J||Min. 30|
Why use GeKa?
As one of the largest manufacturers of welding consumables in Europe, GEDIK WELDING provides outstanding quality supplies. GEDIK, based in Turkey, are leaders in the worlds of robotic welding and automated processes, and their advanced technology and quality assurance extends to their consumables range. GeKa is one of their registered trademarks that covers their catalogue of MIG wire, MMA electrodes, and TIG filler rods, in a wide range of materials.
Material to be welded:
Current : DC =+
Shielding Gas: 2.5% Oxygen (O2) / Argon Mix or 2.5% Carbon Dioxide (CO2) / Argon Mix
|TS EN ISO 14343-A||G 19 9 L Si|
|EN ISO 14343-A||G 19 9 L Si|
|AWS A5.9||ER 308 LSi|
Please note that these 15kg spools will not fit all of our MIG welders. If in doubt, please call and one of our team will happily advise.