Home » Welding Supplies » MIG Welding Supplies » 0.8mm 308 L Si Stainless Steel MIG Wire GMAW ELOX SG | 1kg Spool

0.8mm 308 L Si Stainless Steel MIG Wire GMAW ELOX SG | 1kg Spool

£16.25 ex VAT

Further Reductions Available On Request 01276 505012

  • GeKa 308LSi
  • Stainless Steel
  • 1kg – 0.8mm

Description

GEKA GMAW 0.8MM 308LSi STAINLESS STEEL MIG WIRE ELOX SG – 1KG SPOOL

All positional 0.8mm 1KG spool of Stainless steel 308LSi MIG Wire from GeKa (GEDIK).  308 L Si MIG wire is a cheaper alternative stainless steel MIG wire to 316 with less corrosion resistance.  308 is often used when welding 304 grade materials.

 

Turkish-made MIG wire for welding 18 / 8 stainless steels for application in the food production, pharmaceutical, paper, cellulose, and general stainless steel fabrication industries.

308LSi is a low carbon stainless steel used for MIG welding on 13% Cr ferritic stainless steels, stabilized steels like 347, or steels of similar grades, including the commonly used steel grade: high-carbon 304.

Solid-core MIG wire for use with shielding gas – recommended 2.5% Argon Mix (TBWS Provide Welding gas – Call for stock availability).

Maintains its ductile performance at low temperatures of down to -196°C and its corrosion resistance at temperatures of up to 350°C (if this heat is exceeded for too long, you may see Intergranular Corrosion).

 

1KG Spools are typically for Spool-on-gun MIG Torches and a limited range of MIG Machines. The hub size (centre barrel) of these spools are smaller than the 5KG and 15KG (Spool Adaptor available).

 

Typical Base Material Grades

X2 CrNi 19 11, X5CrNi 18 10, X6 CrNiTi 18 10, X6 CrNiNb 18 10, X2 CrNiN 18 10, X10 CrNiNb 18 1O

AISI & ASTM: 304, 304L, 304LN, 321, 347, A320Gr.B8C, A320Gr.B8D

 

Chemical Composition of Welding Wire % (Typical)
Carbon (C) Silicone (Si) Manganese / Magnesium (Mn) Chromium (Cr) Nickel (Ni)
0.02 0.80 1.7 20.4 10.2
Mechanical Properties
Yield Strength (N/mm2) Tensile Strength (N/mm2) Impact Strength (ISO-V/+20°C) Elongation (Lo=5do) (%)
Min. 400 550 – 700 Min. 63 J Min. 30

 

 

Why use GeKa?

As one of the largest manufacturers of welding consumables in Europe, GEDIK WELDING provides outstanding quality supplies. GEDIK, based in Turkey, are leaders in the worlds of robotic welding and automated processes, and their advanced technology and quality assurance extends to their consumables range. GeKa is one of their registered trademarks that covers their catalogue of MIG wire, MMA electrodes, and TIG filler rods, in a wide range of materials.

 

GeKa G3Si 1 Welding Positions

 

Material to be welded:

Current : DC =+

Shielding Gas: 2.5% Oxygen (O2) / Argon Mix or 2.5% Carbon Dioxide (CO2) / Argon Mix

Standards
TS EN ISO 14343-A G 19 9 L Si
EN ISO 14343-A G 19 9 L Si
AWS A5.9 ER 308 LSi

 

Please note that these 15kg spools will not fit all of our MIG welders.  If in doubt, please call and one of our team will happily advise.

 

Reviews

There are no reviews yet.

Be the first to review “0.8mm 308 L Si Stainless Steel MIG Wire GMAW ELOX SG | 1kg Spool”